All possibilities of stationary machines in small size!
- Overall dimensions: (height x width x length) =
~11" x 15" x 13" (29cm x 38cm x 35cm)
- Weight : ~ appr. 13 pounds (6 kg).
- Motor power: 450 Watt;
- Power source: 220 V AC or 120 V AC;
- Stroke: 2.4" - 6.5" (6cm - 16cm) adjustable;
- Frequency: 0 - 350 RPM regulated;
- Remote control operated (On/off, frequency adjusting).
- Working angles: 0 - 90 degrees up (from horizontal to vertival);
0 - 30 degrees down;
- Angle adjustment step: 15 degrees;
- Shaft length (stick out of frame size): 4" (10 cm);
- Working height (over the surface): 10" (25cm) (in horizontal state).
- Compa is a compact stationary fucking machine allowing all possibilities of "big" stationary machines.
- Compa has a steel welded frame. Drive is fixed on a frame.
- The shaft guide is mounted on a plate, allowing angle adjustment from 0 to 90 degrees up, and 0 - 30 degrees down (from horizontal to vertical position, and to 30 degrees down);
- The angle adjustment may be easily made by turning the plate and placing the fixing bolt to another position (hole). Angle may be adjusted by step 15 degrees (just convenient).
- Motor rotation transforms by crankshaft mechanism to forward-backward strokes of dildo.
- The stroke may be adjusted (2.4" - 6.5" [6cm - 16cm] ) by rearranging the position of rod on a lever (5 adjusting holes).
- Compa has a cable remote control, with On/Off switch and frequency regulator (0 - 350 RPM) , cable length 14 ft (4 m).
- Dildo is attached with Vac-U-Lock joint. (Dildo is not included!) All Vac-U-Lock compatible dildos are acceptable.
- Compa keeps such advantages of stationary fucking machines, as power, speed, remote control, etc., but has small size and may be placed on an ordinary chair.
- Placing Compa on different supports (floor, chair, table, bed, etc.) various working heights may be obtained, allowing different positions (lying, sitting on a sofa, high chair, doggy, standing, etc.)
- The shaft sticks out of frame size on 4" (10 cm), it makes it convenient in use and gives possibility of pointed down positions, placing Compa on higher support (for example down from the table).
- The shaft extension may be supplied as an additional part for an order. It gives possibility to place Compa on a longer distance from body (for some special "positions").
- The second additional shaft may be supplied for an order, allowing to assemble the double-ended version of Compa machine.
- Compa allows to adjust the vertical shaft position, giving possibility of standing positions! (This is practically impossible in most of known stationary machines!).
- Compa is supplied in assembled state, it needs no difficult assembling procedure.
- Thanks to original design it became possible to make Compa a low price (for stationary machine with such advantages!) and low shipping price!
- Compa set price: $439 . *(see special note).
- Basic set includes Compa machine, with remote control, and equipped with Vac-U-Lock
attachment (dildo is not included).
- Shipping: by UPS or EMS(Express Mail Service). (see SHIPPING)
- The EMS shipping price: (for example to USA - $90).
- Shipping term - 3-7 days.
- Manufacturing term: 1-2 weeks from receiving an order.
- Manufacturing place: Kiev, Ukraine.
*** WARNING: As any motor device the Compa needs special care!
In case of incorrect use it may cause a body damage!
back to Compa main page
The purchase of items from Motorfun Workshop indicates agreement that the owner of said items
is solely responsible for the safe use thereof.